Most effects’ parameters can varied during performance via MIDI control change
These are
available from the optional foot controller. Each preset can have up to eight parameters that
to these
changes. Most of the factor); presets are set up with controllers assigned to them
Set the
mode of the foot controller to control change. Select an active controller by pressing the
buttons
on the foot controller corresponding to the effect to be controlled. Now using the or A buttons, you can
change the value of that parameter during performance.
The Tube Fex will respond to MIDI volume change messages (controller These changes are global. That
is, they affect the unit even after the program is changed. A CV pedal assigned to controller will act as a
MIDI volume pedal. You can reassign the volume to a different control
if you wish. Volume can also
be controlled from the front panel, but this is not usually done during performance. See chapter 4.
Chapter 3
Editing Programs
Содержание Tube Fex None
Страница 1: ......
