Peavey Tube Fex None Скачать руководство пользователя страница 51

Страница: 51 / 62

Appendix C System Exclusive Format

The following is the format for the System Exclusive dump and load requests:

FO 00 00

ch cm nn data . . . cksum (data . . . cksum . . F7

W h e r e :

reserved for future use.

receive channel.

MIDI command. (See Table of

nn number of selected

Preset or Set. (Include only for Dump One Preset, Dump One

or Dump Set requests. Do not include in Dump All Presets, Controllers, or Programs.)

data

parameter data included only in load messages.

cksum modulo 128 checksum included only in load messages.

Note: For valid SYSEX DUMP requests, the

and checksum is not included.

Note: All numbers are in hexadecimal

cm nn

00 nn Dump One Preset

including continuous controllers.

02 nn

Preset Set

including continuous controllers.

Dump All Presets (nn not included)

continuous controllers.

Dump All Programs

OE Dump Edit Buffer

One

one preset’s parameter data and continuous controllers.

Set:

Dumps ten preset’s

and continuous controllers.

All

Dumps all 128 user preset’s parameter data, continuous controllers, and the program/
volume

Dump

Dumps the program/volume map.

Edit

Dumps contents of name, chain, parameter, and continuous controller

edit

SYSEX Dump File Format

The following information is provided for programmers wishing to make use of sysex dump files to initialize
remote editing software.

The first ten

transmitted in response to a dump one preset request is the sysex

one

header.

Following that, in

form are ten

Next come ten

representing

chain.

Finally come

representing the effect parameters. The

of this

is the

used

in the remote editing

The order of the

and the number of bytes for

effect is as follows:

Appendix C

Format

C-7

Содержание Tube Fex None































































Результаты поиска

Содержание Tube Fex None

Отзывы:

Бренды по названию

Популярные бренды

Peavey Tube Fex None, Руководство по эксплуатации

Результаты поиска

Содержание Tube Fex None

Отзывы:

Бренды по названию

Популярные бренды