The
Sh
parameter is used to select the center point of the mid frequency range. The shift
frequency is adjustable from
300
Hz
to
900 Hz
in 10 Hz increments.
The
Rs
(Resonance)
adjusts the bandwidth of the midrange frequency.
Range is
0.1
to
4.9.
Overdrive
The Overdrive effect consists of an overdrive type digital distortion. Overdrive is a mono effect.
(Lo-Roll)
.
Parameters
LR:
The (Low
parameter is used to adjust the overall tone rolling off the low frequencies.
is
NORML,
and 0.1 to
1.9
The
PD
Drive) parameter is a gain control used to overdrive the signal.
is
Cl:
The Cl (Clip) parameter is a “soft-clipping” control which provides increased sustain.
the clip level increases the sustain. Range is O-99.
Note:
As the clip level is reduced, the overall output level of the overdrive is reduced. Therefore,
low
clip levels will require a large increase in output volume. This can greatly decrease the dynamic range
of the effect and increase noise.
The (Level) parameter adjusts the output level of the Overdrive effect. Range is
100%.
Appendix A Individual
A-5
Содержание Tube Fex None
Страница 1: ......
