Compressor
The Compressor effect suppresses high input levels while boosting small signal
as the
decreases.
The net result is a more consistent output volume and increased sustain.
Peak Detect
I n p u t
1
N o i s e
Gate
.
output
C o m p r e s s o r
(Sustain)
(Level)
Parameters
The
Atk
(Attack) parameter adjusts the speed at which the compressor responds to increases
in signal
is
from
X Slow
to
X Fast.
The
(Release) parameter adjusts the time for the output signal to decay. Range is from
X Slow
to
X Fast.
Setting the release to
X Fast
results in a very rapid decay, while setting the release
to X Slow results in a very slow decay.
The Sus (Sustain) parameter provides seven levels of sustain to
the maximum
of gain
that can achieved the compressor at small signal levels. Range is O-6.
The
Lev
(Level) parameter adjusts the maximum output of the
Range is 0400%.
At low signal levels, a compressor’s gain
very high, thus raising the
of noise output
with no signal present. The
(Noise Gate Threshold) parameter provides ten levels of noise
suppression on the output. Range is
Distortion
The Distortion effect consists of a digital distortion followed by an equalizer section.
is mono effect.
Parameters
The
Dr
(Drive) parameter- controls the amount of distortion pre-filtering
boosting the input
signal. Range is
The
Ps
parameter is used to reduce the signal level to prevent
the
section of the effect.
is
100.
Ft.
The
Ft
(Fat) parameter controls the low frequency gain. Parameter range
The
Ed
parameter controls the high frequency gain. Range is
Bd
(Body) parameter controls the mid
gain. Range is
A-4
Appendix A
Effects
Содержание Tube Fex None
Страница 1: ......
