manualshive.com logo in svg

Peavey Tube Fex None, Руководство по эксплуатации

Поделиться
Скачать
Peavey Tube Fex None Скачать руководство пользователя страница 14

 Direct connection to a mixing console.

When recording direct, or in some live situations, connect the Direct Outputs of the 

 

 directly

into two channels of a mixing console. If you are using the Tube Fex as   guitar 

 you may want

to experiment with building sounds using the Speaker Simulator effect. To hook up:

 Connect your guitar to the Signal Input jack on the 

 Fex.

 Connect the Left and 

 

 Outputs to the Left and Right mixer inputs, respectively.

 Connect the Left and Right Outputs of your mixer to your amplifier’s audio inputs
 If 

you 

haven’t already done so, connect the Left and Right Outputs of the amplifier to speakers.

Note:

We’ve found the 

 Fex to be so recording friendly that you 

 not need to 

 the Speaker

Simulator. Experiment and see.

Also, if you use the speaker simulator, you may want it to only 

 the sound going 

To get signal to your monitor amplifier insert the fx loop directly 

 the 

 simulator and

use the   loop sends to carry signal to your monitor amplifier.

Chapter 

Setup

Tube Fex

 

 

 1000 

 

-

-

-

-

-

-

-

-

 

"

-

-

-

-

1

 

Содержание Tube Fex None































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды