*
Periodically wipe the cabinet with a damp cloth and mid detergent. Do not use abrasives or
solvents.
*
The meter is suitable for indoor use only
*
The measurement instrument is not to be unattended.
*
Do not operate the meter before the cabinet has been closed and screwed safely as terminal can
carry voltage.
*
Do not store the meter in a place of explosive, inflammable substances.
*
-
Measuring instruments don’t belong to children hands-
Cleaning the cabinet
Prior to cleaning the cabinet, withdraw the mains plug from the power outlet.
Clean only with a damp, soft cloth and a commercially available mild household cleanser. Ensure that
no water gets inside the equipment to prevent possible shorts and damage to the equipment.
1.1. Table 1; Line inputs
Function
Terminal
Input Limits
V DC
V/
+ COM
1000 V DC
V AC
V/
+ COM
1000 V AC
Ohm
V/
+ COM
250 V DC/AC
mA DC/AC
mA + COM
600 mA/1000 V
10 A DC/AC
10 A + COM
10 A/1000 V
/ (((
*
)))
V/
+ COM
250 V DC/AC
LOGIC
V/
+ COM
250 V DC/AC
1.2. Safety Symbols
The following symbols are imprinted on the meter’s front panel to remind you of measurement
limitations and safety:
10 A
The maximum current that you can measure at this terminal is 10 amps DC/AC. This
terminal is fuse protected by 10A/1000V fuse. When using this range with high current,
keep the duty cycle to 30 seconds on load and 15 minutes off load.
mA
The max. current, that you can measure at this terminal is 600mA DC/AC. This terminal
is fuse protected by F630mA/1000V fuse.
To avoid electric shock or instrument damage, do not connect the common input COM
and V/
terminal to any source of more than 1000 volts with respect to earth ground.
The max. voltage this meter can measure is 1000V DC/AC.
Be exceptionally careful when measuring high voltages. Do not touch the
terminals or test leads ends. Refer to the complete operating instructions.
Both direct and alternating current
Indicates protection class I
CAT II
Overvoltage category II
-34-
1000V
