PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
PDI-E29
” LED TV User Manual
Document Number PD196-357R1
Page 34 of 36
MTI/Smart Port
Allows the TV to connect to alternate sources through MTI or Smart Port.
1. Enter the Setup menu.
2. Press
▲ or ▼ highlight MTI/Smart Port Source.
3. Press
◄ or ► to change to the source that you want the TV.
4. Press SETUP to return to the previous menu. To exit, press SETUP until the programming
menus disappear.
Operation
Accessing External Video Sources
PDi LED televisions come with all external video sources disabled. Only the TV tuner and USB Media sources
are enabled. See the Programming section for instructions on enabling other sources such as HDMI. There are
three ways to change the currently active video source.
1. Press the TV/AV key (sometimes labeled SOURCE or INPUT) to cycle through each enabled video
source. Some pillow speakers have a TV/FM key (sometimes labeled with a musical note) which only
cycles between the FM Radio (if enabled) and the TV tuner.
2. Pressing Channel Up/Down will cycle through each video source after visiting all the programmed TV
channels. The setting
“Channel to Other Sources” must be enabled.
3. Type the virtual channel number corresponding to the video source.
Channel
Video Source
141
Composite (A/V)
146
HDMI 1
147
PC-Analog (VGA)
149
FM Radio
150
HDMI 2
151
DVD/Android Module
152
USB Media
Wireless Control
PDi LED televisions include wireless connectivity for use with the optional PDI-TR100 Table Radio. Both wireless
audio and control of the TV are possible using the Table Radio. Please
refer to the Table Radio manual (PD196-191) for setup instructions.
NOTE:
TV’s Standby power should be set to “Normal” when using the table
radio for control.
