Document Number PD196-253R6
PDI-E24
” LED TV User Manual
Page 23 of 36
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Features
The Features menu provides adjustable settings that customize the TV to your hospital.
1. Press the SETUP button.
2. Press
▲ or ▼ to highlight Features.
3. Press
► to enter the Features sub-menu.
Power on Caption Mode
Power on Caption Mode memorizes the caption setting upon
powering the TV off. With this feature set to off, the TV will
always power on with captions disabled. With this feature set to
Last, the TV turns on with the last caption
’s setting.
1. Enter the Features menu.
2. Press
▲ or ▼ to highlight Power on Caption Mode.
3. Press
◄ or ► to select Last or Off.
4. Press the SETUP button to return to the previous menu.
To exit, press SETUP until the programming menus
disappear.
NOTE:
If Power on Caption Mode is set to Last and the physical
power is removed, the TV will power on with caption off.
Auto Power On/Lock
The TV will turn on and stay on whenever electrical power is
applied to the set. The feature is useful for controlling the TV
from a wall switch or preventing the TV from being turned off by the TV power button or the remote control.
1. Enter the Features menu.
2. Press
▲ or ▼ to highlight Auto Power On.
3. Press
◄ or ► to select Disabled or Enabled.
4. Press the SETUP button to return to the previous menu. To exit, press SETUP until the programming
menus disappear.
Inactive Power Off (h:mm)
The TV will automatically power off after a specific period of viewer inactivity, providing energy savings.
NOTE:
Auto Power On/Lock must be set to Disabled for this function to operate.
1. Enter the Features menu.
2. Press
▲ or ▼ to highlight Power Management.
3. Press
◄ or ► to select an active time or select Disabled to disable this feature.
4. Press the SETUP button to return to the previous menu. To exit, press SETUP until the programming
menus disappear.
Bed A/B/C/D
The TV can be controlled by a patient IR remote without interference from another nearby remote. The TV offers
selectable codes for independent control of each television in a 2, 3, or 4 television room. See the Remote
Controls section (pg. 8) for instructions to set PD108-210, PD108-421, or PD108-427 patient remote.
1. Enter the Features menu.
2. Press
▲ or ▼ to highlight Bed A/B/C/D.
3. Press
◄ or ► to select A
,
B, C, or D to match the remote
’s code set.
4. Press the SETUP button to return to the previous menu. To exit, press SETUP until the programming
menus disappear.
5. Try the patient remote to make sure it works with the Bed setting.
6. If it does not, change the remote
’s code setting.
7. Try the remote again.
NOTE:
Some patient remotes do not allow Bed C or Bed D codes.
Caption Text Modes
Teletext can be displayed in addition to Captions. Teletext is not normally broadcast in the USA. Caption Text
Modes should be set to Disabled for TVs operated in the USA.
1. Enter the Features menu.
Splash Image
/C/D
