PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
PDI-E29
” LED TV User Manual
Document Number PD196-357R1
Page 33 of 36
5. Press ▲ or ▼ to highlight the Digital Firmware version desired.
6. Press ► to select.
7. A confirmation will ask to verify firmware, Y
es ▲ or Back ◄.
8. Press
► to select.
9. Screen will confirm
“Firmware upgrade is done”.
NOTE:
Cloning Main Menu only appears if
“USB Media” source is
disabled when using a blank USB drive.
Upload Boot Code to TV
Bootstrap firmware code is updateable if necessary, but is seldom required. Please contact PDi for additional
instructions.
Upload Splash Image to TV
A custom graphic image can be displayed every time the TV is powered on instead of the PDi logo. Graphics such
as the hospita
l’s logo, picture, or other information is displayable and is easily changed once the graphic has been
created.
Create a JPEG image of the desired content with and image resolution and color depths not to exceed the
mode
l’s limits. NOTE: the JPEG file must not exceed 1 MB in size.
MODEL
MAX RESOLUTION
MAX COLOR DEPTH
E24ELED
1920 x 1080
24 bit
1. Name the file
“logo.jpg” and then copy it to root of USB Flash Drive.
2. Insert the USB Flash Drive into the TV. If USB media source is set to disabled, A Cloning Main Menu
will appear.
3. Press
▲ or ▼to highlight Upload Splash Image to TV.
4. Press
► to select and upload the new logo image.
5. A confirmation screen will ask to verify the upload, press Yes
▲ to continue or Back ◄ to exit.
6. A progress screen indicating Splash Image Upload will appear as the image is uploaded to the TV,
followed by a completion screen indicating successful uploading.
7. The TV will shut off. Remove the USB drive.
8. Power the TV On and verify the new Logo image is displayed at startup.
Information
Displays the Digital Firmware and Boot Code versions currently resident in the TV.
1. Turn the TV On and insert a USB Flash Drive into the TV. A Cloning Main Menu will appear.
2. Press
▲ or ▼to highlight Information.
3. Press
► to select and display the TV’s current firmware version.
4. A read-only screen lists the current Digital Firmware and Boot Code versions in the TV.
5. Press Back
◄ to exit and return to the previous menu.
NOTE:
If the USB drive contains a
“.tdf” file, then the clone menu appears regardless of “USB Media” source
status.
*To exit cloning menu, you must remove the thumb drive.
*File names shown are for reference only*
