PDi PDI-E24LEDA-NK, Руководство пользователя, Страница: 12 / 37

Document Number PD196-253R6 PDI-E24
” LED TV User Manual
Page 11 of 36
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Picture
This menu allows you to make changes to settings that will change
the picture
’s appearance.
1. Press the SETUP button on the remote control.
2. Press
▲ or ▼ to highlight Picture.
3. Press
► to enter the Picture sub-menu.
Brightness, Contrast, Color, Tint, and Sharpness
These settings have a range of 1-100. To change one of them,
change the number by following this process.
1. Enter the Picture menu
2. Press
▲ or ▼ to highlight the setting you want to change.
3. Press
◄ or ► to the desired number.
4. Press SETUP to return to the previous menu. To exit, press SETUP until the programming menus
disappear.
Backlight
This setting allows you to make changes to the backlight from
bright, normal and low
1. Enter the Picture menu
2. Press
▲ or ▼ to highlight Backlight.
3. Press
► to change the settings from bright, normal, or low.
Color Temperature
Color Temperature adjusts the color balance of the picture. Standard,
Reddish, Greenish, and Bluish are preset adjustments. You can
customize the color temperature with the User setting.
1. Enter the Picture menu
2. Press
▲ or ▼ to highlight Color Temperature.
3. Access the menu by pressing
►.
4. Press
▲ or ▼ to highlight and select one of the five settings.
5. For User, press
◄ and ► to select R, G, or B or to get out of
the customized adjustments.
6. Press
▲ or ▼ to adjust R,G, or B
NOTE: When you select one of the three colors to adjust,
the other two turn grey.
7. Press SETUP to return to the previous menu. To exit, press
SETUP until the programming menus disappear.
Noise Reduction
This setting enables impulse, spatial, and temporal video noise filtering.
1. Enter the Picture menu
2. Press
▲ or ▼ to highlight Noise Reduction.
3. Press
►to choose Enable or Disable
4. Press SETUP to return to the previous menu.
PC Analog/HDMI Picture
Adjustment of a computer
’s picture can be made only when the TV is
in PC-Analog or HDMI mode.
1. Enter the Picture menu
2. Press
▲ or ▼ to highlight PC Analog/HDMI Picture.
3. Access the menu by pressing
►.
4. Press
▲ or ▼ to highlight and select one of the settings.
5. Press
◄ and ► to adjust the setting.
6. Press SETUP to return to the previous menu. To exit, press
SETUP until the programming menus disappear.
Backlight
HDMI Over scan