Document Number PD196-253R6
PDI-E24
” LED TV User Manual
Page 25 of 36
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
TV
UR3-SR3
Bed A
072
Bed B
073
3. Press
◄ or ► to select Enabled or Disabled.
4. Press SETUP to return to the previous menu. To exit, press SETUP until the programming menus
disappear.
Channel to Other Sources
External signal sources connected to the TV, such as DVD players or video-game systems, are shown in the
current channel lineup after the highest channel and then shown on the TV. Set this feature to Disabled to require
the activation of the external sources by pressing the remote
’s or the TV’s TV/AV button. Set this feature to
Enabled to allow access to external devices by pressing the channel up or down buttons on a remote or most
pillow speakers.
1. Enter the Features menu.
2. Press
▲ or ▼ to highlight Channel to Other Source.
3. Press
◄ or ► to select Enabled or Disabled.
4. Press SETUP to return to the previous menu. To exit, press SETUP until the programming menus
disappear.
Power on ARC Mode
The TV powers on with a set screen size aspect ratio of 4:3, 14:9, 16:9, 16:9 Panorama, or Last.
1. Enter the Features menu.
2. Press
▲ or ▼ to highlight Power On ARC Mode.
3. Press
► to select 4:3, 14:9, 16:9, 16:9 Panorama, or Last.
4. Press SETUP to return to the previous menu. To exit, press SETUP until the programming menus
disappear.
NOTE:
If Power on ARC Mode is set to Last and the physical power is removed, the TV will power on with the
default ARC mode for the power on channel type.
Wireless
Wireless Audio provides sound to Headsets, PDI Table Radio, or other similar wireless devices.
1. Enter the Features Menu.
2. Press
▲ or ▼ to select Wireless Audio.
3. Press
◄ or ► to select Other or Wireless PDi.
4. Press the SETUP button to return to the previous menu. To exit, press SETUP until the programming
menus disappear.
Analog Pillow Speaker
Enables/disables use of an Analog Pillow speaker for controlling TV. An Analog Pillow Speaker is operated by
one button located in the center of the speaker. This button controls the Power ON/OFF, as well as the channels.
Note: To turn the TV off, press and hold down the button for 3 seconds.
1. Enter the Features Menu.
2. Press
▲ or ▼ to select Analog Pillow Speaker.
3. Press
◄ or ► to select Enable/Disable.
4. Press the SETUP button to return to the previous menu. To exit, press SETUP until the programming
menus disappear.
UR3-SR3 Remote
This PDi TV can accept IR codes from the UR3-SR3 universal remote. To take advantage of this feature you
must enable by choosing
“Support” in this menu. When enabling support, some pillow speakers will no longer
operate as expected. Codes for specified beds are listed.
1. Enter the Features Menu.
2. Press
▲ or ▼ to select UR3-SR3 Remote.
3. Press
◄ or ► to select Support/No Support
4. Press the SETUP button to return to the previous menu. To exit, press SETUP until the programming
menus disappear.
Splash Image
This PDi TV can have a custom image displayed every time TV is powered on.
1. Enter the Features Menu.
2. Press
▲ or ▼ to select Splash image.
3. Press
◄ or ► to select Enabled/Disabled
4. Press the SETUP button to return to the previous menu. To exit, press SETUP until the programming
menus disappear.