PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
PDI-E29
” LED TV User Manual
Document Number PD196-357R1
Page 32 of 36
Restore Setting to TV
1. Turn the TV On.
2. Insert a Flash Drive with stored clone file (user provided)
into the USB Clone Port located adjacent the Cable TV
Jack.
3. When the Cloning Main Menu appears, pres
s▲ or ▼ to
highlight Restore Setting to TV.
4. Press
► to initiate.
5. When the Restore Settings to TV menu appears, press
▲ or
▼ to highlight the appropriate settings file.
6. Press
► to initiate.
7. Wait for the Cloning Main Menu to reappear. You will get a
confirmation screen. Press
▲ to continue or ◄ to go
back.
8. The TV will restart after settings are restored.
9. Remove the USB Disk from the TV.
10. Verify correct setup of the TV.
Upload Firmware to TV
You are cautioned that changes or modifications not
expressly approved by the party responsible for compliance
could
void the use's authority to operate the equipment.
The firmware for the ELED TV is field upgradeable, but normally
does not require this process and should be performed by the
hospital technician. A special data file is required from the PDi
factory to complete this process. The file is posted on the web
site:
http://www.pdiarm.com/support/
Firmware files are written to a USB Flash Drive, connected to the
T
V’s Cloning port (See page 7), and updated using the TV’s
menus. Once complete, the TV settings may need to be
reprogrammed.
Uploading Automatically:
1. Insert USB into TV. USB Cloning and Firmware Update
Menu will appear.
2. Press
▲ or ▼ to highlight Upload Firmware to TV.
3. Press
► to select and Upload Firmware to TV menu will
appear.
4. Press
▲ or ▼ to highlight Automatic Upload New Firmware.
Press
► to select.
5. A confirmation will ask to verify firmware, Y
es ▲ or Back ◄.
6. Press
► to select.
7. Screen will confirm
“Firmware upgrade is done”.
Uploading Manually:
1. Insert USB into TV. USB Cloning and Firmware Update
Menu will appear.
2. Press ▲ or ▼ to highlight Upload Firmware to TV.
3. Press ► to select and Upload Firmware to TV menu will
Appear.
4. Press
▲ or ▼ to highlight Manual Upload Digital Firmware.
Press
► to select.
*File name shown is for reference only*
Firmware Information
