62
can be moved from one device to another using the FTP protocol.
In case of PCE-P30U-X1XXXXXX manufacturing variants, a single
external memory card can be used to transfer configuration to multiple
transducers equipped with external SD card slots.
To force parameter update from file, switch on the transducer while pres
-
sing
key. If the configuration file contains appropriate data
and the new configuration is accepted, the following message will be
displayed on the transducer display:
Fig.22. Message confirming successful readout transducer
configuration from file.
If the parameter update from file is forced and a proper file is missing
or existing file contains corrupted data (at least one corrupted
parameter), the current configuration will be maintained and the follo
-
wing message will be displayed:
Fig.23. Message informing about an unsuccessful readout
transducer configuration file.
5.6. Default settings
Default PCE-P30U transducer settings have been provided
in table 17. These settings can be restored using transducer menu by se
-
lecting
Settings Service
→
Fabr.Par
→
Yes
or via RS-485
interface by entering “1” in register 4055.