Manual
8
5.2.1.4
Display of the stored files (“Browse”)
By pressing
a new window is opened. In this window, the curves and peak value files stored on the
meter are displayed in a tabular form. That name is presented which the file shows. To navigate is
possible with the help of
By pressing
on one of the selected files you get a possibility to see the file information, such as time
of saving and size, displayed. Besides, it is possible to delete the selected files individually.
To exit this window, press
.
5.2.2
“Limit values”
In this item, positive and negative limit values can be set. When these values are reached, there is a
potential pending signal at the output jack. With this, for example, a relay can be switched. If you operate
the device with the test stands PCE-TF 3, PCE-TF 4, offered by us, the machines can be stopped in such
a way. The limit values may show positive, negative or both a positive and negative numerical value. With
activated distance measurement (optional) an upper and a lower distance limit value can be set in
addition.
Note
: The data transfer and storage is automatically stopped when a limit value is exceeded.
Two symbols (“<", ">") on the display above the power indicator show the current limit value status. The
"<" symbol indicates that the measurement value is below the limit value. If the current measurement
value reaches and exceeds the set limit, the ">" symbol is displayed.
5.2.2.1
“Upper limit” and “lower limit”
After pressing
you can choose between the input of the limit value as a numerical value, the
operating mode of the output limit value and the selection of the sign mode. Navigation is carried out with
the help of
"Set point"
Pressing
makes the input of the value for the limit value active. The cursor is moved to the desired
digit with the help of
. With
the desired value of the digit can be decreased or increased.
The key
confirms the input of the value.
"Mode Output
"
Pressing
activates the selection operating mode of the limit output. With
you may choose
between closing and opening function of the limit value output. Confirm with
.
"Sign"
Clicking
activates the selection of type of the limit value. With
you select between signed and
absolute value. Confirm with
.
