Manual
11
5.2.5
Calibration No. (Selection of a characteristic)
The manual selection of a characteristic is only necessary if you have no TEDs measuring cells available
and use several sensors without TEDs.
Connect the desired cell with the instrument and select the required curve with the help of
.
Confirm the selection by pressing
.
Pressing
brings you back to the measurement mode. The measuring cell should be ready to use now.
5.2.6
System
5.2.6.1
Date / Time
Here you can set the date and time. It is necessary only in case of battery pack change, as the date and
time are set at the factory.
With
you can set the time and date. The input is activated after the initial pressing of any of both
keys.
Confirm with
5.2.6.2
Language
The following languages can be set for the display:
-
German
-
English
-
Spanish
-
French
-
Italian
Choose with the help of
the desired language and confirm with
. The language changes
immediately after pressing
.
5.2.6.3
Auto off function
You can choose different possibilities:
-
Off (auto power off is disabled)
-
1 (auto power off after 1 minute)
-
2 (auto power off after 2 minutes)
-
5 (auto power off after 5 minutes, factory setting)
-
10 (auto power off after 10 minutes)
With
you can choose one option. Confirm with
.
