Paxar Monarch 9860, Руководство по эксплуатации

Страница: 92 / 114

5-8 MonarchNet2 Operating Instructions
To stop printing the collation number on formats, use this command:
SET PRN REL COUNT NONE
.
♦ The counter field appears in Bold, Reversed type - design formats
with the counter field’s height and width in mind, so data is not
overwritten.
♦ The counter always counts to 9999 and then starts back at 0.
The value entered with the console command
(
SET PRN REL COUNT 10
) is the value used for the next label.
♦ The counter value is saved when you turn off the printer.
♦
Repeating a canceled batch uses the next number in sequence.
There is no way to decrement the counter .
♦ Batches sent to the partner printer from other sources (besides the
primary printer) are not incremented and have no
Smart Relay collation field.
Note: If using the Smart Relay counter, do not use the Repeat
Batch, Cancel All, or Cancel Batch menu items. These items
cause the counter number to be incorrect. To set the counter
to the correct number, use the console command:
SET PRN
REL COUNT xxxx
, where xxxx is the correct number.
After you specify the row and column locations, the Smart Relay
counter field is automatically appended to your format. If you view
the MPCL data for the format, the Smart Relay counter field appears
like this text field:
T,750,4,V,10,5,0,2,2,2,R,L,0,0,0¦
Note: Do not add field 750 to your formats. It is reserved for the
Smart Relay Field Position and automatically added to the
format by the primary printer.
Row Column values
Smart Relay Counter Field