Paxar Monarch 9860, Руководство по эксплуатации, Страница: 20 / 114

2-4 MonarchNet2 Operating Instructions
S u b n e t M a s k
IP networks are divided using subnet masks. The subnet mask
address determines where the IP address belongs in the network. It
consists of four 3-digit numeric fields.
To change the setting, from the Main Menu: Select Setup , Network .
Then follow these steps.
1. Press or until you see
NETWORK
Subnet Mask
2. Press Enter/Pause . The current setting is displayed, for example:
Subnet Mask
255.255.000.000
3. Press or to move through the positions. Press Feed/Cut to
scroll one digit at a time from 0-9. After you display the option
you need, press
Enter/Pause .
For example, to change the subnet mask from 192 to 000,
press or to highlight the first position and press
Feed/Cut until you see 0, then press to select the next
position and press Feed/Cut until you see 0, then press to
select the next position and press Feed/Cut until you see 0.
Press Enter/Pause to save the setting or press Escape/Clear
to exit without saving.
If you enter a series of digits greater than 255 for any
segment of the subnet mask and press
Enter/Pause , the
printer does not save the setting and no error appears on the
display. Correct the subnet mask and then press
Enter/Pause
to save the setting.
4. Press Escape/Clear until you see the Main Menu.