Paxar Monarch 9860, Руководство по эксплуатации

Страница: 103 / 114

Glossary G-1
G L O S S A R Y
Absolute Pathname The full path of a file, including the computer system and
any directories or subdirectories. For example,
c:\program files\monarch softw are\mpcl
toolbox\9855.phu
Access Point An interface between a wireless network and a wired
network. Access points can be used with Ethernet or other
communications to enable roaming throughout a facility.
Ad-Hoc
Netw ork/Mode A wireless network composed of devices that contain a
network interface card and no access point.
Ad-Hoc mode is also called peer-to-peer (point-to-point)
communications or BSS network. As long as the devices
are in range and are on the same channel and SSID, they
connect and communicate. Use this mode if a wireless
infrastructure does not exist or where services are not
required.
Authentication
Method This method identifies users on a network, based on a
username and password. There are two types: open and
shared. Authentication protocols include LEAP, PEAP, TLS,
TTLS, EAP-FAST, and PSK.
Auto Method One of the available boot methods. Auto tries DHCP,
BOOTP, and RARP, then sets to the last IP address used if
the IP address is not automatically set using any of the
previous methods.
BOOTP or
Bootstrap Protocol
One of the available boot methods. It is a protocol used by
devices that know their MAC address, but do not know their
IP address. The device broadcasts its hardware address
and the BOOTP server responds with the IP address for it.
The network administrator must enter the MAC address in
the BOOTP Config file to obtain the IP address from the
server.
Boot Method The wireless print server uses this method to obtain an IP
address. This can be set to Auto, DHCP, BOOTP, RARP, or
Static.
Boot Tries The number of times the device tries to get an IP address
from the server when using the BOOTP and DHCP methods.
BSS or
Basic Service Set A set of 802.11b/g devices operating as a fully connected
wireless network.
BSSID See MAC Address .
G