Paul NOVUS 300, Оригинальная инструкция по эксплуатации

Страница: 49 / 68

49
3.6.1.5 Submenu Flap of the geothermal heat exchanger (GHE)
In this menu, it is specified whether a flap of the geothermal heat exchanger is available.
Symbol Designation Explanation / actions
Button
Checkmark By touching the button Checkmark, an available flap of the
geothermal heat exchanger is released.
Button
Cancel / back By touching the Cancel / back button, exit the menu levels until the
start menu appears.
Tab. 36: Parameterisation flap of the geothermal heat exchanger
3.6.1.6 Submenu Reset factory data
In the submenu Reset factory data, the device can be reset to factory data.
Symbol Designation Explanation / actions
Button
Checkmark By touching the button Checkmark, the plant is reset to factory
data.
Button
Cancel / back By touching the Cancel / back button, exit the menu levels until the
start menu appears.
Tab. 37: Reset factory data
Maintenance and repair by qualified personnel 3.7
If regular maintenance work is not performed at the NOVUS, this impairs the functioning of
the comfort ventilation.
The maintenance and repair by qualified personnel should only be carried out by a maintenance service
on the basis of a maintenance contract. The maintenance and repair measures for the NOVUS include
the inspection and cleaning of the fans and the heat exchanger. Cleaning of the heat exchanger is carried
out depending on the degree of soiling; the maintenance interval should not exceed two years.
The maintenance work performed must be documented in check list B!
Inspecting and cleaning the heat exchanger 3.7.1
In order to do so, proceed as follows:
1. Disconnect the NOVUS from the power supply.
2. Pull the maintenance flap A with the magnetic clamps from the front panel.