Paul NOVUS 300, Оригинальная инструкция по эксплуатации

Страница: 46 / 68

46
Buttons
Navigation Selection Type defroster heater
Select the respective type by touching the navigation buttons (red
background of the text).
Button
Checkmark By touching the Checkmark button, the type of defroster heater is
selected.
Button
Cancel / back By touching the Cancel / back button, exit the menu levels until the
start menu appears.
Tab. 31: Parameterisation submenu frost protection
When falling below an anti-freeze protection threshold, an existing anti-freeze protection
component is activated. If it remains falling below the anti-freeze protection threshold, this
leads to switching off of the fans and an error message.
3.6.1.2 Submenu Fan speeds
In the submenu fan speeds, settings regarding the fan output and balancing can be made. for all three fan
speeds. The supply air fans are parameterised separately for each fan speed in steps of 1% between 17
%...100 & &. If necessary, balancing for each fan speed is performed by adjusting the exhaust air fan in
the range -50 % … +50 %. A varying fan output (imbalance) is calibrated by the service technician
depending on the configuration of the system and is determined by means of the balance control.
Any change of the fan output via the main menu Settings can lead to a shift of the balance
behaviour, in particular at the upper and lower limits of the fan characteristic curve.
Symbol Designation Explanation / actions
Button
Fan speed 1
(FS1) Using the button Fan speed 1, activate the FS 1 and
parameterise it with the navigation buttons.
Setting range: 17 % < FS1 < FS2
Using the b / -, an imbalance can be set.
Button
Fan speed 2
(FS2) Using the button Fan speed 2, activate the FS 2 and
parameterise it with the navigation buttons.
Setting: FS2 = Nominal air volume flow
Using the b / -, an imbalance can be set.
Button
Fan speed 3
(FS3) Using the button Fan speed 3, activate the FS 3 and
parameterise it with the navigation buttons.
Setting range: FS2 < FS3 < 100 %
Using the b / -, an imbalance can be set.
Buttons
Enter
Cancel / back Confirm by touching the Enter button. By touching the Cancel /
back button, exit the menu level.
Tab. 32: Parameterisation submenu fan speeds