Patton electronics IPLink Series Скачать руководство пользователя страница 64 | Manualshive

Страница: 64 / 331

Patton electronics IPLink Series Скачать руководство пользователя страница 64

Auto provisioning of firmware and configuration

64

IPLink Software Configuration Guide

6 • System image handling

The unit downloads a specific file from a TFTP server. If this file has changed since the last download, it is
stored and executed. If the file on the server did not change since the last download, no action is taken. If the
units are configured to do auto provisioning, a network operator can only update the firmware files on the
TFTP server, which automatically distributes it to all units. The “profile provisioning” configures this. Here’s
an example for firmware provisioning:

profile provisioning FIRMWARE
destination script
location 1 tftp://172.16.1.2/firmware/b
location 2 tftp://172.16.1.33/firmware/b
activation reload graceful

Explanation

:

Here’s an example for configuration provisioning:

profile provisioning CONFIG
destination configuration
location 1 tftp://tftp1.provider.net/configs/$(system.mac).cfg location 2 tftp://172.16.1.33/configs/$(system.mac).cfg activa-
tion reload graceful

Explanation

:

Step

Command

Purpose

1

[

name

] (pf-prov)[

FIRMWARE

]#destination script

Chooses the unit’s script interpreter as des-
tination of the downloaded file. Use this
for firmware updates. Script files are the

b

,

b1

, … files that come with each unit

firmware update.

2

[

name

] (pf-prov)[

FIRMWARE

]#location 1

tftp://172.16.1.2/firmware/b

Specifies the location of the file to check
for changes.

3

[

name

] (pf-prov)[

FIRMWARE

]#location 2

tftp://172.16.1.33/firmware/b

Specifies alternate locations of the file. If
the first could not be contacted, the sec-
ond is tried, and so on.

4

[

name

] (pf-prov)[

FIRMWARE

]#activation reload

graceful

Specifies how the new firmware is to be
activated. Choose between immediate or
graceful reload.

Step

Command

Purpose

1

[

name

] (pf-prov)[

CONFIG

]#destination

configuration

Chooses the unit’s startup-configuration as
destination of the downloaded file.

2

[

name

] (pf-prov)[

CONFIG

]#location 1

tftp://tftp1.provider.net /configs/
$(system.mac).cfg

Specifies the location of the file to check
for changes. $(system.mac) is a place-
holder for the unit’s MAC address of
ETH 0/0. Using host names instead of IP
addresses works only if DNS resolver is
enabled and configured.

«
...
62
63
64
65
66
...
»

Содержание IPLink Series












































































































































































































































































































































Отзывы:

Нет отзывов