Patton electronics IPLink Series, Руководство по настройке программного обеспечения, Страница: 236 / 331

Using the AdventNet SNMP utilities 236
IPLink Software Configuration Guide 20 • SNMP configuration
• The default value in the Community text field is public. Set the community of the incoming traps as desired,
depending on the SNMP configuration of your IPLink device.
• Click on Add button to add the port and community list on which the trap has to listen to. This is visible in
the TrapList combo box.
• The port and community list can be deleted by clicking on the Del button.
• When you need to load a trap parser file, click on the Load button, which will open up a dialog box, from
which you can load the parser file.
• In order to receive the traps now, click on the Start button. Upon clicking this button, TrapViewer begins to
receive traps according to the as-specified port and community.
• Once received, the traps are listed in the trap table of the TrapViewer. By default, the trap table has the fol-
lowing four columns:
- Class that defines the severity of the trap.
- Source that displays the IP address of the source from where the traps were sent.
- Date that shows the date and time when the trap was received.
- Message that by default has the object identifier format (sequence of numeric or textual labels on the
nodes along a path from the root to the object) of the trap if any, or it is blank.
• The details of the traps can be viewed by clicking the Trap Details button or right click the trap in the trap
table and select the option View Trap Details.
Figure 38 show the screen of such a trap details window.
Figure 38. AdventNet Trap Details window of TrapViewer