Patton electronics IPLink Series, Руководство по настройке программного обеспечения, Страница: 109 / 331

Configuring the local database accounts 109
IPLink Software Configuration Guide 9 • RADIUS Client Configuration
servers are down or the network is not reachable, you can create an emergency user in the local database so that
you can still access the IPLink. Perform the following steps to configure the local accounts.
Mode : Configure
Example : Create an administrator and an operator account
IPLink>enable
IPLink#configure
IPLink(cfg)#administrator meier password pencil
IPLink(cfg)#operator james password ""
IPLink(cfg)#show accounts
Administrator accounts:
meier
Operator accounts:
james
IPLink(cfg)
Note
If you are creating an account that does not require a password, type "" to
indicate that no password is needed. For example, if you were configuring an
account for an operator named James that did not need a password, the
entry would be:
IPLink(cfg)#operator james password ""
Step Command Purpose
1 node(cfg)#[no] administrator name pass-
word password
Adds an administrator account to the local data-
base. The
no form removes an existing account
2 node(cfg)#[no] operator name password
password
Adds an operator account to the local database.
The
no form removes an existing account
3 node(radius)[name]#shared-secret
authentication
secret
Sets the password shared between the RADIUS
client (the IPLink) and the remote RADIUS server.
4 node(pf-auth)[name]#show accounts Display existing accounts