manualshive.com logo in svg

Patton electronics IPLink Series, Руководство по настройке программного обеспечения, Страница: 34 / 331

Поделиться
Скачать
Patton electronics IPLink Series Скачать руководство пользователя страница 34

Introduction

34

IPLink Software Configuration Guide 

3 • Command line interface (CLI)

Introduction

The primary user interface to IPLink software is the command line interface (CLI). You can access the CLI via 
the IPLink console port or through a Telnet session. The CLI lets you configure the complete IPLink software 
functionality, as opposed to the SNMP and HTTP management interfaces that offer a more limited subset of 
the functions. You can enter CLI commands online or as a configuration script in the form of a text file. The 
CLI also includes monitoring and debugging commands. CLI commands are simple strings of keywords and 
user-specified arguments. 

This chapter gives an overview of the CLI and the basic features that allow you to navigate the CLI and edit 
commands effectively. The following topics are covered:

•

Command Modes

•

Command Editing (see 

page 35

)

Command modes

The CLI is composed of modes. There are two mode groups: the exec mode group and the configuration mode 
group. Within the exec mode group there are two modes: operator exec and administrator exec. The configura-
tion mode group contains all of the remaining modes. A command mode is an environment within which a 
group of related commands is valid. All commands are mode-specific, and certain commands are valid in more 
than one mode. A command mode provides command line completion and context help within the mode. The 
command modes are organized hierarchically. The current working mode is indicated by the CLI prompt. 
Appendix B,

 “Mode summary” 

on page 309 contains a detailed overview of all command modes, and 

appendix C,

 “Command summary” 

on page 313 describes the commands that are valid in each mode.

CLI prompt

For interactive (online) sessions, the system prompt is displayed as:

nodename>

In the operator exec mode, the system prompt is displayed as:

nodename#

In the administrator exec mode and in the different configuration modes, the system prompt is displayed as:

nodename(mode)[name]#

Where:

•

nodename is the currently configured name of the IPLink, the IP address or the hardware type of the device 
that is being configured

•

mode is a string indicating the current configuration mode, if applicable.

•

name is the name of the instance of the current configuration mode

Example:

 the prompt in 

radius-client mode

, assuming the nodename IPLink and the instance deepblue is:

IPLink(radius)[deepblue]#

The CLI commands used to enter each mode and the system prompt that is displayed when you are working 
in each mode is summarized in appendix B,

 “Mode summary” 

on page 309.

Содержание IPLink Series












































































































































































































































































































































Отзывы:

Нет отзывов