RIP configuration task list
210
IPLink Software Configuration Guide
18 • RIP configuration
The following example shows how to display the RIP configuration of IP interface wan of an IPLink.
IPLink(cfg)#context ip router
IPLink(ctx-ip)[router]#interface wan
IPLink(if-ip)[wan]#show rip interface wan
Interface wan (IP context router):
--------------------------------------------------
listen: disabled
supply: enabled
send version: 1compatible
receive version: 1or2
learn host: disabled
learn default: disabled
announce host: disabled
announce static: disabled
announce default: disabled
announce self-as-default: disabled
route-holddown: enabled
poison-reverse: disabled
auto-summary: disabled
split-horizon: disabled
default-route-value: 0
--------------------------------------------------
Displaying global RIP information
IPLink software also support displaying global RIP information for the IP router context. This procedure
describes how to display the global RIP information
Mode: Configure
Example:
Displaying global RIP information
The following example shows how to display the global RIP information on an IPLink.
IPLink(cfg)#show rip
RIP information:
rip enabled
Step
Command
Purpose
1
node(cfg)#show rip
Displays the RIP information
Содержание IPLink Series
Страница 309: ...309 Appendix B Mode summary Chapter contents Introduction 310...
Страница 312: ...Introduction 312 IPLink Software Configuration Guide B Mode summary...
Страница 325: ...325 Appendix D Internetworking terms acronyms Chapter contents Abbreviations 326...
Страница 330: ...330 Appendix E Used IP ports in the IPLink software Chapter contents Used IP ports in the IPLink software 331...