manualshive.com logo in svg

Patton electronics IPLink Series, Руководство по настройке программного обеспечения, Страница: 155 / 331

Поделиться
Скачать
Patton electronics IPLink Series Скачать руководство пользователя страница 155

Link scheduler configuration task list

155

IPLink Software Configuration Guide 

14 • Link scheduler configuration

Some types of packets you do not have to tag with ACL. Voice and data packets from or for the IPLink itself 
are automatically tagged with predefined traffic-class names: Predefined internal classes for voice and other data 
are:

•

local-voice

—VoIP packets that originate from the IPLink itself.

•

local-default

—All other packets that originate from the IPLink itself.

•

default

—All traffic that has not otherwise been labeled.

Creating an access control list

The procedure to create an access control list is described in detail in chapter 19, 

“Access control list configura-

tion” 

on page 211.

At this point a simple example is given, that shows the necessary steps to tag any outbound traffic from a Web 
server. The scenario is depicted in 

figure 26

. The IP address of the Web server is used as source address in the 

permit statement of the IP filter rule for the access control list.

Figure 26. Scenario with Web server regarded as a single source host

A new access control list has to be created. In the example above, the traffic-class that represents outbound Web 
related traffic is named Web.

Access control list have an implicit “deny all” entry at the very end, so packets that do not match the first crite-
ria of outbound Web related traffic will be dropped. That is why a second access control list entry—one that 
allows all other traffic—is necessary.

This procedure describes creating an access control list for tagging web traffic from the single source host at a 
certain IP address.

Web-Server

172.16.1.20/24

Node

IPLink

17.254.0.91/16

172.16.1.1/24

lan

wan

172.16.1.0

IP Access

Network

Содержание IPLink Series












































































































































































































































































































































Отзывы:

Нет отзывов