Attaching a bridge interface to a VLAN module
37
Models 3224 G.SHDSL IpDSLAM & 6081RC NAS Applications Guide
4 • VLAN bridged connection
2. In the
Add VLAN
section (see
figure 33
on page 36), select the interface that will process VLAN packets
from the
Parent Interface
menu.
3. In the
VLAN ID
text box, type the desired number for this VLAN (up to 4096 with no reserved VLAN
numbers).
4. Click the
Add VLAN button
. Configured VLANs are displayed as shown in
figure 34
.
Figure 34. Configured VLAN Interfaces section of VLAN (802.1Q) Configuration page
Attaching a bridge interface to a VLAN module
Once the desired VLAN has been created, it is necessary to attach it to a bridge group as follows:
1. Click the Interface link in the
Configuration Menu
pane (see figure 3 on page 6) to display the
Interface
page (see
figure 35
).
Figure 35. Interface page
2. Locate the Ethernet port that has the VLAN ID created in section
“Attaching a VLAN ID to an Ethernet
interface”
on page 36 and click to place a checkmark on the box in the
Enabled
column. Select the desired
bridge group from the menu in
Bridge Group
column (this bridge group should correspond to the remote
CPE for which a VLAN is required), then click to place a checkmark on the box in the
Bridged
column.
3. Click the
Submit
button at the bottom of the screen.
Содержание ForeFront 6081RC EdgeRoute
