manualshive.com logo in svg

Patton electronics 3096RC, Руководство по началу работы

Поделиться
Скачать
Patton electronics 3096RC Скачать руководство пользователя страница 68

Completing the installation

68

Model 3096RC T-DAC Getting Started Guide 

3 • Configuring the T-DAC for operation

Note

If the T-DAC does not behave as described, the most likely cause is 
that the T-DAC default settings are not compatible with the T1/E1 
line. If this is the case, use the RS-232 CONFIG port to correct the 
T-DAC settings. You will have to use the 3096RC Configuration 
Menu pages to examine the configured T1/E1 link settings.

6. There are two LEDs that indicate the status of the T-DAC 10/100 Ethernet port: a green LED indicates 

link status and activity, and a yellow LED that indicates line speed. Verify that the green LED is either 
flashing green (meaning that packets are being received at the Ethernet port) or solid green (meaning that 
the link is valid but no packets are being received).

Congratulations! Your T-DAC is now installed. If you require further information about configuring your T-
DAC settings, refer to the DSL T-DAC Administrator’s Reference Guide included on your Model 3096RC
CD-ROM.

Note

For information on activating and de-activating your Model 3096RC 
T-DAC, refer to chapter 4,

 “Operation and shutdown” 

on page 69

Содержание 3096RC































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды