13
About this guide
This guide describes installing and configuring a Patton Electronics Model 3096 TDM-Digital Access Concen-
trator (T-DAC). By the time you are finished with this guide, your T-DAC will be connected to the remote
DSL modems and transferring data. The instructions in this guide are based on the following assumptions:
•
The T-DAC will connect to a T1 or E1
•
There is a LAN connected to the Ethernet port of the T-DAC
•
Users will be connected to remote G.SHDSL modems
Audience
This guide is intended for the following users:
•
Operators
•
Installers
•
Maintenance technicians
Structure
This guide contains the following chapters and appendices:
•
Chapter 1 describes the T-DAC
•
Chapter 2 describes installing the T-DAC hardware
•
Chapter 3 describes configuring the T-DAC for use
•
Chapter 4 details how to power up and deactivate the T-DAC
•
Chapter 5 contains troubleshooting and maintenance information
•
Chapter 6 contains information on contacting Patton technical support for assistance
For best results, read the contents of this guide
before
you install the T-DAC.
