Using a browser to complete Model 3096RC configuration
56
Model 3096RC T-DAC Getting Started Guide
3 • Configuring the T-DAC for operation
3. Click the
Change Configuration
button at the bottom of the screen to display the configurable parameter
fields (see
figure 35
).
Figure 35. G.SHDSL Port configurable parameters
4. Near the bottom of the pane, use the drop-down menu to change Payload Rate to your desired G.SHDSL
data transmission rate.
5. Using the drop-down menu, select the correct Annex Type for your environment.
Note
Annex A is commonly used in North America, while Annex B is com-
monly used elsewhere.
6. Click the “Submit” button to record your changes in volatile DRAM. You will automatically return to the
G.SHDSL Port # Details page (shown below), displaying the values you selected (see
figure 36
).
Figure 36. G.SHDSL Port # Details page
You have now completed the procedure to activate one G.SHDSL port. To activate additional G.SHDSL
ports, repeat the above procedure for each port you wish to activate.
