Using a browser to complete Model 3096RC configuration
63
Model 3096RC T-DAC Getting Started Guide
3 • Configuring the T-DAC for operation
2. From the Line Coding pull-down menu (see
figure 48
), select dsx1B8ZS(2) or dsx1AMI(5).
Figure 48. Line Coding pull-down menu with dsx1B8ZS(2) selected
3. From the Line Build Out pull-down menu (see
figure 49
) select t1pulse0dB(1).
Figure 49. Line Build Out pull-down menu with t1pulse0dB(1) selected
4. Click on
Submit Query
to apply your settings.
At this point the WAN front panel LEDs will become active. The FRAME indicator LED should now display
a steady green light, indicating the T-DAC has synchronized with the E1 line. If the E1 line is not connected to
the 3096RC, T1/E1 link pages will display the hyperlink ALARMS PRESENT (see
figure 50
) for that
T1/E1 link.
Figure 50. T1 ALARMS PRESENT indicator on T1/E1 LINK ACTIVITY page
After you connect the E1 line to the WAN port on the rear of the Model 3096RC, these alarms should disappear.
