Using a browser to complete Model 3096RC configuration
60
Model 3096RC T-DAC Getting Started Guide
3 • Configuring the T-DAC for operation
2. From the Line Coding pull-down menu (see
figure 41
) select dsx1AMI(5) or dsxHDB3(3). Most installa-
tions will use HDB3.
Figure 41. Line Coding pull-down menu with dsx1HDB3(3) selected
3. From the Line Build Out pull-down menu (see
figure 42
) select e1pulse(1).
Figure 42. Line Build Out pull-down menu with e1pulse(1) selected
4. Click the
Submit Query
button to apply your line interface settings.
At this point the WAN front panel LEDs will become active. The WAN indicator LED should now display a
steady green light, indicating the T-DAC has synchronized with the E1 line. If the E1 line is not connected to the
3096RC, T1/E1 link pages will display the hyperlink ALARMS PRESENT (see
figure 43
) for that T1/E1 link.
Figure 43. E1 ALARMS PRESENT indicator
After you connect the E1 line to the WAN port on the rear of the Model 3096RC these alarms should disappear.
