manualshive.com logo in svg

Patton electronics 3096RC, Руководство по началу работы

Поделиться
Скачать
Patton electronics 3096RC Скачать руководство пользователя страница 22

Hardware overview

22

Model 3096RC T-DAC Getting Started Guide 

1 • Introduction

CLK SOURCE

Green On solid The 3096RC is set as the Master Clock source.

Flashing The 3096RC is set as the secondary clock source.

Off

The 3096RC is set as the slave, getting its clock from the H.110 Bus.

CLK ERROR

Yellow On solid Master Clock source has been lost and the 3096RC is using the secondary source 

for its clock.

Flashing Master Clock source and the Secondary Clock source have been lost and the 3096RC 

is using its internal crystal for its clock. 

Off

No clock errors currently detected. 

TEST MODE

Green On solid One or more G.SHDSL ports or T1/E1 ports is in test mode.

Flashing One or more of the G.SHDSL ports or the T1/E1 ports is in test mode and errors 

have been received.

Off

None of the G.SHDSL ports is operating in test mode.

WAN

a

Green On solid Indicates the given port is activated, linked, and operating normally.

Single 

Flash

Indicates that the Model 3096RC is detecting the network, but is unable to synchro-
nize with it.

Double 

Flash

Indicates an error on any of the T1/E1 links.

Off

Indicates no T1/E1 links are in use.

DSL 
CONNECTION
(LEDs 1–16)

b

Green On solid The port is activated, linked, and operating normally.

Flashing The port is activated but not linked or in an error state.

Off

The G.SHDSL port has not been configured to establish a link.

READY

Blue

On

Card ready for removal from cPCI chassis.

Off

Card not ready for removal from cPCI chassis.

a. The WAN LED provides status indications for the WAN links established via the T1/E1 ports on the rear blade 

of the 3096RC.

b. Revisions A and B of the Model 3096RC are configured with a single DSL LED on the front panel. When lit, 

the DSL LED indicates that one or more G.SHDSL ports has successfully established a link and no G.SHDSL 
ports have errors; when flashing, the LED indicates that one or more G.SHDSL ports have errors; and when 
extinguished, the LED indicates that no G.SHDSL ports have been configured to establish a link.

Table 3. LED definitions (Continued)

LED

Color Status

Meaning

Содержание 3096RC































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды