ParTech 7200, Инструкция по эксплуатации

Страница: 30 / 50

7200 Monitor Instruction Manual
14 Instrument Setup
14.1 Measurement Title
This menu is used to select the measurement title displayed in measure mode. The user can select from a list of
predefined titles or enter a custom title. To select a measurement title, use the

keys to highlight the required title
and press the OK key. If a predefined title is selected, a small tick will appear next to the selected title. If the user-
defined option is selected, a new screen will be displayed which allows editing of the user defined title.
User Defined Title
To edit the user defined title, use the

keys to select a character, and the

keys to change the selected
character. When all changes are complete press the OK key to store the measurement title. To exit without saving
changes press the MENU key.
14.2 Display Units
The measurement units displayed in measure mode can be selected using this menu such that they are appropriate
for the measurement being made. The user can select units from a predefined list, enter custom units (user defined) or
switch off the display of units.
To select the measurement units, use the

keys to highlight the required title and press the OK key. If a predefined
title is selected, a small tick will appear next to the selected title. If the user-defined option is selected, a new screen
will be displayed which allows editing of the user defined units.
User Defined Units
To edit the user defined units, use the

keys to select a character, and the

keys to change the selected
character. When all changes are complete press the OK key to store the new units. To exit without saving changes
press the MENU key.
Linked Units
The m/g and g/l units are linked such that changing from one to the other will cause a change in the display range
such that the display value is appropriate for the units selected. The linked relationship between units and ranges is
shown in the table below.
Note: Changing from/to any units other than those shown will not effect the display range.
Old Range Old Units Units Changed
To:
New Range
0 – 10000 mg/l g/l 0 – 10.00
0 – 50000 mg/l g/l 0 – 100.0
0 – 10.00 g/l mg/l 0 – 10000
0 – 100.0 g/l mg/l 0 – 50000
14.3 Display Contrast
When this menu is selected, the display contrast can be adjusted over the range 0% (light) to 100% (dark) using the

keys. Pressing the OK key stores the new contrast setting and exits the menu, pressing the MENU key exits losing
any changes made to the contrast setting.
Page 30 of 50 167300IM-Issue 12 Issue Date 14/10/2014