ParTech 7200, Инструкция по эксплуатации

Страница: 15 / 50

7200 Monitor Instruction Manual
7.2 Data Entry
To provide the user with a simply interface, the 7200 uses three methods of data entry for the setting of all the user
configurable parameters. The various methods of user data entry used on the 7200 are described below:
7.2.1 User List Selection
This method of user data entry is used when a selection from a predefined list of option is required such as sensor
type, display range and backlight mode. The list of possible selections will be displayed and a small tick will identify the
current setting. If the list contains more than five items, small
UP and DOWN arrows will appear on the display to
indicate there are more items than that displayed. To make a selection, the selector bar can be moved using the

keys, to select the required item. Pressing the OK key will select the highlighted item and a small tick will appear next
to it. Pressing the MENU key will exit the list selection menu.
7.2.2 User Value Entry
When a numerical value is to be set, the current value will be displayed with a flashing cursor. The range of
adjustment of the value is predefined and therefore only values within this range can be entered. To adjust a value, the

keys are used to select a digit and the

keys are used to increment/decrement the digit. When the new value
has been set pressing the OK key will store it and exit from the value adjustment display. If the MENU key is pressed
any changes that have been made will be lost and the value adjustment display will be exited.
167300IM-Issue 12 Issue Date 14/10/2014 Page 15 of 50
List Selection Display – note tick indicating current value
Value Entry Display