Parsun HF4830S60-145, Руководство пользователя

Страница: 10 / 39

All-in-one solar charge inverter V11 10
2. Installation instructions
2.1 Installation precautions
Please read this manual carefully prior to installation to familiarize yourself with the installation
steps.

Be very careful when installing the battery. Wear safety goggles when installing a lead-acid
liquid battery. Once coming into contact with the battery acid, rinse with clean water timely.

Do not place metal objects near the battery to prevent short-circuit of the battery.

Acid gas may be generated when the battery is charged. So, please ensure good ventilation.

When installing the cabinet, be sure to leave enough space around the all-in-one solar charge
inverter for heat dissipation. Do not install the all-in-one solar charge inverter and lead-acid
battery in the same cabinet to avoid corrosion by acid gas generated during battery operation.

Only the battery that meets the requirements of the all-in-one unit can be charged.

Poorly connected connections and corroded wires may cause great heat which will melt the
wire insulation, burn the surrounding materials, and even cause fires. So, make sure the
connectors have been tightened, and the wires are secured with ties to avoid looseness of
connections caused by shaking of wires during mobile application.

The system connection wires are selected according to a current density of not more than 5
A/mm
2 .

Avoid direct sunlight and rainwater infiltration for outdoor installation.

Even after the power is turned off, there is still high voltage inside the unit. Do not open or
touch the internal components, and avoid related operations until the capacitor completely
discharges.

Do not install the all-in-one solar charge inverter in harsh environments such as moist, oily,
flammable or explosive, or heavily dusty areas.

Polarity at the battery input end of this product shall not be reversed, otherwise it may
damage the device or cause unpredictable danger.

The mains input and AC output are high voltage, so please do not touch the wiring terminals.

When the fan is working, do not touch it to prevent injury.

Load equipment input power needs to confirm that this all-in-one solar charge inverter is the
only input device, and it is forbidden to use in parallel with other input AC power to avoid
damage. It is necessary to confirm that the solar charge inverter is the only input device for
load equipment, and it is forbidden to use it in parallel with other input AC power to avoid
damage.