All-in-one solar charge inverter V11 13
2.3 Installation and wiring
Installation steps:
：
Step 1:
Determine the installation position and the space for heat dissipation. Determine the installation
position of the all-in-one solar charge inverter, such as wall surface; when installing the all-in-one solar
charge inverter, ensure that there is enough air flowing through the heat sink, and space of at least 200m
to the left and right air outlets of the inverter shall be left to ensure natural convection heat dissipation.
Refer to the installation diagram of the whole machine as above.
Warning:
Danger of explosion! Never install the all-in-one solar charge inverter and lead-acid
battery in the same confined space! Also do not install in a confined place where battery gas may
collect.
