Parker Porter MPC Series, Инструкция по установке, программированию и эксплуатации

Страница: 20 / 30

- 18 -
SECTION 6 – APPLICATION OPERATION
When the following operation is performed while the totalized flow rate is displayed, the parameter setup
mode and function setup mode are entered and each setting value can be changed.
Function setup
Parameter setup
indication
(3 seconds or longer)
press [<] key
(3 seconds or longer)
(3 seconds or longer)
Setting
Mode
Operation
Basic
Application
Operation
press [DISP] key
press [DISP] key
press [<] key
press [DISP] key
press [<] key
(3 seconds or longer)
press [DISP] key (less than 1 second)
press [DISP] key or any key is not
pressed for 10 seconds or longer.
press [DISP] key (1 second or longer)
flow rate indication *3
Totalized flow rate
Totalized flow rate
Lights
Totalized
Operation mode
press [DISP] key
press [V] key
flow rate indication
Power ON
for 10 seconds or
Any key is not pressed
Operation mode
indication *1, *2
longer
Instantaneous
flow rate
Set flow rate
flow rate
Instantaneous
Instantaneous
Valve drive output
Valve drive
output indication
flow rate
Instantaneous
Setting
Mode
indication
Blinking
flow rate indication *4, *5
No. (SP No.)
Setting flow rate
Setting flow rate
(SP value)
Multi-setting