Parker Porter MPC Series, Инструкция по установке, программированию и эксплуатации

Страница: 12 / 30

- 10 -
PANEL MOUNTING
To panel-mount the MPC Series Panel Mount MFC, the panel thickness must be 2 to
9 mm (.079 to .35”) and a panel cut-out be made to accommodate the MFC’s 44.8 x 44.8 mm (1.764
x 1.764”) housing. To panel-mount multiple MFC’s, refer to the panel cutout dimensions below.
Remove the mounting bracket from the MFC’s housing.
From the front of the panel, insert the MFC through the panel cutout until the MFC’s bezel rests
against the front of the panel.
With the mounting bracket screws oriented vertically (i.e. 6 o’clock and 12 o’clock), slide the mounting
bracket onto the MFC’s housing and up against the back of the panel.
Fasten the MFC onto the panel by tightening the mounting bracket screws. Tighten the screws an
additional half turn when there is no space between the mounting bracket and panel. Overtightening
the screws may damage the MFC’s housing.