PAC120 5715-719UK.indd 05.06.20
PAC120 5715-719UK.indd 05.06.20
53
52
Parker Automation Controller
Series PAC120
Parker Automation Controller
Series PAC120
Example
The following screen shots show the communication of a PAC120 with a PACHC controller module according to
the example from the chapter before.
Cyclic communication
Acyclic communication
Before calling up the Parker function block, the configuration for the read parameters with the data block Asyn-
chron_Read_DB is done.
In this example Int16[1], Int32[1], Real32[1] and String[1] are configured for reading.
In this example Int16[0], Int32[0], Real32[0] and String[0] are configured for writing.
In this example the Hardware ID is 0x0115 and the number of parameters to send is 7 (equal to the number param-
eters in the data block). The number of the read DB is 105 and of the write DB is 106. The outputs show that two
parameters have been read and one has been written to the PAC120.
CODESYS V3.5
CODESYS V3.5
