Re�cle Adjustment refers to aligning the re�cle with the point of impact at an established shoo�ng distance, so
that the posi�on of the aiming point at this specific distance corresponds with the point of impact of the bullet.
This func�on, measures the orienta�on of the device so that the yaw and pitch angles of the device can be
displayed and calibrated.
6
. Gyroscope
：
5
. Re�cle Adjustment
：
22
Press [+/-] to move the cursor to the gyroscope se�ng op�on and press [OK] to enter the sub-menu
.
Press [+/-] to select "Display" or "Calibra�on" and then press [OK] to enter.
"Display" indicates whether (or not) to display the yaw and pitch angle of the device on the home screen. Press
[+/-] to select "Off" or "On", and press [OK] to save and return to the menu.
“Calibrate” means to enter the calibra�on state. A�er selec�ng, please place the device on a horizontal plane
surface, and press [OK] to perform automa�c calibra�on. A�er calibra�on, the device will automa�cally return
to the home screen.
Press [+/-] to move the cursor to the re�cle adjustment se�ng op�on. Press [OK] to enter the sub-menu.
Press [Menu]/[OK] to switch sub-menu op�ons, and press [+/-] to adjust the value of the corresponding item.
A�er selec�ng your preferred se�ngs, press and hold [OK] to confirm and save and return to the home screen.
X represents the current magnifica�on (1x/2x/4x/6x/8x �mes).
RTZ represents the crosshair storage type (there are 5 profiles A-E).
XY represents the coordinates of the cross line.
Style corresponds to the crosshair type (6 op�ons available).
Color corresponds to the color of the cross line (red/white/yellow/green).
Under the Save op�on, "Y" means to SAVE, and "N" means DO NOT save.
①
②
③
④
⑤
⑥
