Paramotor PXP Meter, Руководство пользователя, Страница: 48 / 118

Data: CHT (Cylinder Heat Temperature)
See also:
5 - Alarm CHT (Cylinder Heat Temperature) - Pag. 45
See also:
4 - Installation "Sensor CHT" (2 Pins - Green) - Pag. 14
A very interesting Data because it will indicate the temperature value in degrees ºC or ºF of
our engine cylinder just below the spark plug.
This CHT Data is going to be able to have it in ºC or ºF according to program in configuration
(GRADOS). Depending on this programming and the CHT Alarm value entered, the Data
number will change color, if we are in optimal values, the Data is set to white, if we are in
values close to the programmed maximum it will put the Data in color orange, if we are in
values that exceed the programmed maximum we put the data in red and intermittent.
Data: RPM (Revolutions per Minute)
See also: 1 - Alarm Revolutions x Minute (RPM) - Pag. 40
See also:
2 - Installation “Revolution Sensors – RPM” (1 Pin – Red)
– Pag. 12
This Data will indicate to us the Revolution that our engine has per minute.
We need to always keep in mind that optimum speed in low or idling of an engine are bet-
ween 1850 to 2300, ideally 2050 / 2100 (depends on the motor).
According to these optimum speed from configuration we will be able to choose between 3
types of Revolutions – Engine
48