Paramotor PXP Meter, Руководство пользователя, Страница: 34 / 118

Well, if we have the activated Sound, it talks to us about the positive connection, well if we
do not have the activated sound, a message will appear on the screen.
If by chance you do NOT connect us for the first time, we will reset - turn off the switchboard
(disconnect the battery, wait a few seconds and reconnect), repeat the connection opera-
tion.
Of course we are also going to identify that we are connected to the Bluetooth - Switchboard
because all of the Sensors Data begin to appear to us, it is obvious, do not you think?
Once the amount of fuel has been entered, we have to connect with the Bluetooth "PXP
Meter".
2 - We give the button "OFF" , we open the Bluetooth
connections screen, here we have to choose the "PXP
Meter" that we have already paired and recognized.
It will connect and pass us again to the "PXP Meter"
screen but we will identify that we are connected as the
"OFF" button has changed to "ON" and it has turned
green and the Bluetooth logo on the left side has also
changed to green.
34