Paramotor PXP Meter, Руководство пользователя, Страница: 11 / 118

Installing the Sensors
1 - Installation "Fuel Sensor" (3 Pins)
It is very easy to cut the tube that supplies the fuel to the engine, (be careful if you have
fuel, dry well or blow before warming up) we heat a little to make it more flexible and insert
both sides of the sensor into the tube.
1 - We cut pipe
3 - We set with clips
and we assure
2 - We see direction arrow e
introduce both sides
Note: if we see the Sensor has position, we have to see
the arrow and install and respect this position of direction
of fuel inlet, otherwise it does not work.
11