Parallax ELEV-8 Y-6, Инструкция по сборке и эксплуатации

Страница: 3 / 32

Bill of Materials
This bill of materials is provided so you may inventory each bag in your ELEV-8 Y-6 Multicopter Kit before beginning construction. If you are
missing any parts, contact sales@parallax.com directly for assistance. Note that some items are small sub-kits with additional components not
listed separately. Parts and quantities subject to change without notice. Some items are available online from www.parallax.com.
ELEV-8 Y-6 Kit Contents (#80100) ELEV-8 Y-6 Hardware Kit (#80120) ELEV-8 Y-6 Electronics Kit (#80110)
Part # Qty Description Part # Qty Description Part # Qty Description
31500 1 Hoverfly OPEN Board 712-00007 4 Washer, #6, 3/8" OD, Zinc 750-90002 6 Brushless 1000kV
700-10003 1 Safety glasses 700-00085 3 Screw, #6-32x1/8", Set, SS 721-80001 3 GemFan 10x4.5-C Regular Carbon
80130 1 ELEV-8 Y-6 Airframe Kit 700-00036 4 Nut, #4-40, Nylon 721-80000 3 GemFan 10x4.5-C Pusher Carbon
80120 1 ELEV-8 Y-6 Hardware Kit 713-00019 4 Spacer, #4,x1/8", NY 750-90000 6 HW30A ESC
80110 1 ELEV-8 Y-6 Electronics Kit 713-00043 16 Standoff, nylon, 4-40, 5/8" threaded 750-00056 21 16 AWG silicone wire, stranded, red
85000 1 ESC Programming Card 710-00036 12 Screw, 4-40, 3/8", PH, SS 750-00058 1.25 12 AWG silicone wire, stranded, blk
710-00042 4 Screw, 4-40, 1 1/4", PH, SS 750-00059 1.25 12 AWG silicone wire, stranded, red
ELEV-8 Y-6 Airframe Kit Contents (#80130) 710-00006 8 Screw,#4-40x1/2",PH,SS 800-00021 2 16" Red Pluggable Jumper-Male
Part # Qty Description 700-00024 4 Locknut, 4-40, 1/4" 800-00022 2 16" Black Pluggable Jumper-Male
730-00060 3 ELEV-8 Boom (Black) 710-00039 24 Screw, 3 x 6 mm, 0.5 thread, black 350-00044 1.5 Red LED Tape
721-80010 1 ELEV-8 Control Board Top Plate 710-00100 6 Screw, 4-40, 1/4", PH, Black 350-00045 3 White LED Tape
721-80002 1 Control Board Mounting Plate 720-28001 1 Light Pipe 452-00088 1 Nylon housing EC3 Plug 10-pack
721-80012 1 Y-6 Chassis Plate Top 725-00067 1 1.5 mm Hex Key 450-00050 2 3.5mm Gold Bullet Conn 10-Pk
721-80013 1 Y-6 Chassis Plate Bottom 700-00106 1 Loctite 242 800-00036 13.5 Heat-shrink 3/4" dia. tubing, clear
721-80006 6 ELEV-8 Motor Mount Bottom 900-00021 2 Nylon Strap, Black 800-00023 36 Heat-shrink 3/16" dia. tubing, black
730-00062 3 Y-6 Landing Gear Mounts 700-00059 24 Washer, Lock, #4, Internal Zinc 800-00039 3 Heat-shrink 1/2" dia. tubing, black
721-80014 3 Y-6 Landing Gear(carbon fiber rods) 700-00093 12 Zip Tie, 4", Black 800-00080 5 3-wire extension, 22AWG, F/F, 8"
120-00006 0.5 5" Red/White Checkered Sticker
120-00007 1 5" Black/White Checkered Sticker
Copyright © Parallax Inc. ELEV-8 Y-6 Multicopter Kit (#80100) Version 1.0 Page 3 of 31