Parallax ELEV-8 Y-6, Инструкция по сборке и эксплуатации

Страница: 12 / 32

Step 6: Attach Landing Gear
In this step you will attach the carbon fiber rods to the landing gear mounts to make up the landing gear assembly. Refer to the diagram below
for the required parts in this step.
1. The carbon fiber rods have a 1/16” notch on one end. Insert this end into the landing gear mount, and be sure that the notch is facing the set
screw hole. This alignment will allow you to lock the carbon fiber rod in position.
2. Apply a light coating of Loctite to the set screw and insert the set screw into the landing gear mount. Using a small flat-head screwdriver,
tighten gently but do not over-tighten — you do not want to strip the head.
Copyright © Parallax Inc. ELEV-8 Y-6 Multicopter Kit (#80100) Version 1.0 Page 12 of 31