Parallax ELEV-8 V2, Инструкция по сборке

Страница: 56 / 130

Section 4: Mounting the Booms and ESCs to the
Chassis
With the Motors assembled and mounted to the Booms, you are now ready to begin mounting
the Booms to the central Chassis and wire the ESCs.
This section will take approximately 1 to 2 hours to complete, depending on skill level and
equipment.
Tools Needed in this Section
● #1 Philips Head Screwdriver
● Flat-Nose Pliers
● Scissors or Diagonal Cutters
● Permanent Marker
Parts Needed in this Section
● 1 – Top/Bottom Chassis Plate (#721-80003)
● 4 – Aluminum Standoff, #4-40 x 1 1/4” (#710-00042)
● 4 – Machine Screw, #4-40 x 3/8” (#710-00036)
● 4 – Boom and Motor Assemblies, prepared in Step 15
● 8 – Saddle Washer, 3/4" (#712-00010)
● 8 – Nylon Spacer, #4 x 1/8" (#713-00019)
● 8 – Aluminum Standoff, #4-40 x 1/8" (#700-00014)
● 4 - Machine Screw, #4-40 x 1 1/2” (#710-00037)
● 4 – Machine Screw, #4-40 x 1 1/4” (#710-00042)
● 4 – 30A Electronic Speed Controller (ESC), prepared in Step 7
● 4 – Zip Tie, 4” Black (#700-00093)
● 1 – HXT to 3.5mm Power Breakout Cable (#800-00006)
Copyright © Parallax Inc. ELEV-8 V2 Assembly Guide
07/26/2018