6
Installing in a Cabinet/Rack without Threaded Screw Holes
Procedure
1. Slip a self-retaining nut into the 3rd, 9th and 16th rail holes on the left side of the
carrier, and into the 3rd, 12th and 16th holes on the right side of the carrier. Align
the hole of the nut with the hole in the rail.
2. Place the access carrier against the front rail of the cabinet, allowing the installed
machine screws to pass through the keyholes.
3. Install the remaining machine screws at the top and bottom on both sides of the
brackets, then tighten them.
Front Rail
Mounting
Bracket
01-15132-01
Front of 19-Inch Carrier Cabinet
9th Hole
Machine
Screw
