12
Installing Front Filler Panels
Once card installations are completed, a filler panel must be installed for each unfilled
NAM slot to ensure compliance with safety requirements.
WARNING:
!
Filler panels must be installed on the unused slots to avoid possible injury
from electrical shock.
The access carrier package contains front filler panels for unused NAM slots and captive
screws to install them. Filler panels provided will cover either four, two, or one empty
NAM slot(s).
Procedure
1. Select the proper filler panel size to cover the empty slots.
2. Latch the front filler panel into place using the upper and lower ejector latches.
3. Screw the bottom ejector screw into the panel using the captive screw already
installed.
4. Screw the top ejector into the panel using the extra captive screw provided.
Fully Loaded Access Carrier
Front View
Slot 01
Slot 14
98 -15743-02
Rear View
Slot 01
Slot 14
