Paradox Marine Magel 6130, Инструкция по установке

Страница: 9 / 44

9
DC power Setup
Marine Magellan
The Marine Magellan panel can easily
be powered from the vessels 12VDC
system. Simply get a constant voltage
source to the unit from the vessels battery
banks or domestic bus (Diagram 8). It is
suggested that the installer fuse protect the
Marine Magellan system by placing an in-
line 1 amp fuse on the Positive input wire
(not supplied).
Marine Magellan
Internal Battery Backup
The Marine Magellan uses its own
backup battery pack to provide power during
a power loss. This is not to be confused
with the Artion Battery Backup. A 7.2Vdc
1.8Ah NiMH (Nickel Metal Hydride)
rechargeable battery pack is included with
the Marine Magellan console. Connect as
shown in Diagram 9.
Artion GSM Module
The Artion GSM module simply needs a
constant 12 VDC to operate
(Diagram 10). In AC installations this power
comes from the battery backup case. In DC
installations, this power comes from the
primary domestic source.
Communication Lines
Marine Magellan to Artion
With the power establish for all the
devices, it is now time to hook up the
communication wire between the Marine
Magellan and the Artion GSM Module.
Simply connect the
“ Line Out ” of the Artion
GSM module to the
“ Line In ” of the Marine
Magellan. The
“ Line Out ” of the Artion has a
tip
“ T ” and ring “ R ” . The general rule when
hooking up this line is red goes to ring and
green goes to tip. There are two options for
connecting to the
“ Line in ” of the Marine
Magellan. The first option is a line plug in
connection through an RJ-11 (Diagram 11).
The second option is a direct connection to
the
“ Ring ” and “ Tip ” (Diagram 12
).